| 1. |
Inspect exterior of equipment for damage or missing hardware.
Int:2 times/yr T:60 |
| 2. |
Inspect the power cord, strain relief and plug/s for any signs of
damage. |
| 3. |
Turn unit off, open user accessible covers and inspect unit for
damage. |
| 4. |
Clean unit interior components and exterior with vacuum or
compressed air.
| |
| 5. |
Inspect interior for signs of corrosion or missing hardware.
Repair as required.
| |
| 6. |
Inspect electrical components for signs of excessive heat or
deterioration.
| |
| 7. |
Inspect condition of all paddle sets paying special attention to
cables.
| |
| 8. |
Verify operation of analog/digital display. Check maximum charge
time.
| |
| 9. |
Inspect energy select switch or potentiometer for mechanical
integrity.
| |
| 10. |
Verify correct operation of features such as high energy and
emergency charge.
| |
| 11. |
Verify synchronizer operation for correct fire time and flag
pulse.
| |
| 12. |
Verify defibrillator output is within ±10% of set
output.
| |
| 13. |
Fire defibrillator at maximum power into load.
| |
| 14. |
Defibrillator output should not vary significantly.
| |
| 15. |
Inspect condition of batteries. Replace as needed.
| |
| 16. |
Inspect battery charger and cable for damage.
| |
| 17. |
Verify correct operation of all buttons, controls, displays and/or
indicators.
| |
| 18. |
SEE NEXT PAGE!
| |